Author Topic: Got my panniers and tail rack!  (Read 530 times)

0 Members and 2 Guests are viewing this topic.

  • Offline domoincan   ca

    • 660 Pro  ‐    89
    • ***
    • Topic Author

    Offline domoincan

    • 660 Pro
    • ***
    • Topic Author
    • Posts: 89
    • Country: ca
    • Bike: Tiger Sport 660
    • City / Town: MITCHELL
    Got my panniers and tail rack!
    on: May 21, 2022, 11.20 pm
    May 21, 2022, 11.20 pm
    Here's a couple pics!
    I kept my top box (Shad SH39) from my old bike and have to try and get it mounted on the new rack.





     :763:
    Last Edit: May 21, 2022, 11.22 pm by domoincan

  • Offline Rado Tiger   us

    • 660 Member  ‐    21
    • **
      #1

    Offline Rado Tiger

    • 660 Member
    • **
    • Posts: 21
    • Country: us
    • Bike: Graphite
    • City / Town: Broomfield, co
    Re: Got my panniers and tail rack!
    Reply #1 on: May 22, 2022, 12.28 am
    May 22, 2022, 12.28 am
    This panniers look great! I may have to splurge on those soon as well. How’s the slick looking attachment work?

  • Offline gsimmons   ca

    • 660 Pro  ‐    87
    • ***
      #2

    Offline gsimmons

    • 660 Pro
    • ***
    • Posts: 87
    • Country: ca
    • Bike: Tiger Sport 660
    • City / Town: Kitchener, ON, CA
    Re: Got my panniers and tail rack!
    Reply #2 on: May 22, 2022, 01.10 am
    May 22, 2022, 01.10 am
    Still waiting for my panniers and luggage rack... Funny that my dealer claims there are none in Canada yet even though I ordered the bike in Jan....

    Looks great!
    Last Edit: May 22, 2022, 01.10 am by gsimmons

  • Offline domoincan   ca

    • 660 Pro  ‐    89
    • ***
    • Topic Author
    • #3

    Offline domoincan

    • 660 Pro
    • ***
    • Topic Author
    • Posts: 89
    • Country: ca
    • Bike: Tiger Sport 660
    • City / Town: MITCHELL
    Re: Got my panniers and tail rack!
    Reply #3 on: May 22, 2022, 02.06 am
    May 22, 2022, 02.06 am
    I got the call that they were in yesterday and picked them up the same day as its a long weekend.
    .... still waiting for the hand guards yet.

    The slick attachment?  I think you are referring to the Puig clip on wind deflector?  I think it's better ... less so in a side wind ... and it's easier to tuck behind when heading into a stiff wind.  It is pretty light weight but I do still notice the screen bouncing around a bit more ... especially when the screen is fully extended.  I've only had the one ride with it yet so still accessing it.
     :763:

  • Offline gsimmons   ca

    • 660 Pro  ‐    87
    • ***
      #4

    Offline gsimmons

    • 660 Pro
    • ***
    • Posts: 87
    • Country: ca
    • Bike: Tiger Sport 660
    • City / Town: Kitchener, ON, CA
    Re: Got my panniers and tail rack!
    Reply #4 on: May 22, 2022, 02.49 am
    May 22, 2022, 02.49 am
    *Originally Posted by domoincan [+]
    I got the call that they were in yesterday and picked them up the same day as its a long weekend.
    .... still waiting for the hand guards yet.

    That might give me hope then... Might here from them this week...

  • Online fred_jb   gb

    • 660 Member  ‐    48
    • **
      #5

    Online fred_jb

    • 660 Member
    • **
    • Posts: 48
    • Country: gb
    • Bike: Tiger Sport 660
    • City / Town: Loughborough
    Re: Got my panniers and tail rack!
    Reply #5 on: May 23, 2022, 10.10 am
    May 23, 2022, 10.10 am
    *Originally Posted by domoincan [+]
    Here's a couple pics!
    I kept my top box (Shad SH39) from my old bike and have to try and get it mounted on the new rack.
     :763:

    I had the same issue with my Shad SH58X top box.  I think that the SH58X uses a different mounting plate to your SH39, but I expect they are pretty similar.  If so you will probably find that if you use the slot type holes in the plate you will be able to line up with the forward bolt holes in the rack.   The rear bolt holes are too close to the centre so I initially used a couple of the Shad clamp type fittings which you can just about see in the following picture, though I subsequently drilled two extra holes in the rack to line up with two of the fixing points in the plate, for a slightly tidier finish.



    Last Edit: May 23, 2022, 10.13 am by fred_jb
    Fred

  • Offline Shandy   gb

    • 660 Pro  ‐    281
    • ***
      #6

    Offline Shandy

    • 660 Pro
    • ***
    • Posts: 281
    • Country: gb
    • Bike: Tiger Sport 660 2022
    • City / Town: Bexley, Kent
    Re: Got my panniers and tail rack!
    Reply #6 on: May 27, 2022, 03.44 am
    May 27, 2022, 03.44 am
    Looking good!

    I have the SH39 box fitted, used  fitting plate supplied with box.

    It seems to fit fine and although it was fitted by dealer, there does not seem to be any extra holes drilled or anything.

    I'll see if I can take box off and take some [pictures when I get home from work but I'm usually pretty tired after a 12hr night shift, so apologies if I forget.

    The take away is that the SH39 box certainly fits to the Triumph rack using the SHAD medium fitting rack, without issue.  :028:

  • Offline moggi1964   gb

    • 660 Member  ‐    28
    • **
      #7

    Offline moggi1964

    • 660 Member
    • **
    • Posts: 28
    • Country: gb
    • Bike: Tiger Sport 660
    • City / Town: Rossendale
    Re: Got my panniers and tail rack!
    Reply #7 on: May 28, 2022, 06.05 pm
    May 28, 2022, 06.05 pm
    *Originally Posted by Shandy [+]
    Looking good!

    I have the SH39 box fitted, used  fitting plate supplied with box.

    It seems to fit fine and although it was fitted by dealer, there does not seem to be any extra holes drilled or anything.

    I'll see if I can take box off and take some [pictures when I get home from work but I'm usually pretty tired after a 12hr night shift, so apologies if I forget.

    The take away is that the SH39 box certainly fits to the Triumph rack using the SHAD medium fitting rack, without issue.  :028:

    Fitted the SH39 Carbon using the Triumph rack and the fitting kit that came with the Shad. Took me about 35 minutes to get the optimal placing of the clips and bolts. I haven't loctited them yet as I wanted to check the pillion space is okay.

    The carbon looks great and the size compliments the scale of the bike.

    I'll grab a picture or two tomorrow.
    Bike rider, photographer and philosopher.

    Not always in that order and not usually all three at the same time.

    https://www.liveinawe.org/blog

  • Offline moggi1964   gb

    • 660 Member  ‐    28
    • **
      #8

    Offline moggi1964

    • 660 Member
    • **
    • Posts: 28
    • Country: gb
    • Bike: Tiger Sport 660
    • City / Town: Rossendale
    Re: Got my panniers and tail rack!
    Reply #8 on: May 31, 2022, 09.54 am
    May 31, 2022, 09.54 am
    Blackpool!





    Bike rider, photographer and philosopher.

    Not always in that order and not usually all three at the same time.

    https://www.liveinawe.org/blog

  • Offline ryan huang   cn

    • 660 Member  ‐    20
    • **
      #9

    Offline ryan huang

    • 660 Member
    • **
    • Posts: 20
    • Country: cn
    • Bike: Tiger sport 660
    • City / Town: Hangzhou, Zhejiang
    Re: Got my panniers and tail rack!
    Reply #9 on: Jun 02, 2022, 06.56 am
    Jun 02, 2022, 06.56 am
    I got my panniers yesterday, I'm pleased with it, because it can accommodate my helmet. I don't want to install top box.


     


    listing